Large mouth straight seam steel pipe is a commonly used steel pipe, widely used in construction, bridges, water conservancy, petroleum, chemical, and other fields. When installing large-mouth straight-seam steel pipes, you need to pay attention to the following points:

Choose the right steel pipe

When selecting large-mouth straight-seam steel pipes, it is necessary to choose a suitable steel pipe according to the specific use environment and requirements. The first thing to consider is the material and specification of the steel pipe, as well as the pressure and temperature range it can withstand. Secondly, the surface treatment and anti-corrosion measures of the steel pipe should be considered to ensure that it will not be corroded and damaged during use.

Check the quality of steel pipe

Before installing large-mouth straight-seam steel pipes, it is necessary to check the quality of the steel pipes. First of all, check whether there are obvious cracks, tumors, dents, and other defects in the appearance of the steel pipe and whether there is rust and corrosion on the surface. Secondly, check whether the size and wall thickness of the steel pipe meets the requirements and whether the nozzle is flat and smooth. Finally, check whether the hardness and strength of the steel pipe meet the standard requirements.

Prepare installation tools and equipment

When installing large-mouth straight-seam steel pipes, it is necessary to prepare corresponding installation tools and equipment. For example, cranes, cranes, slings, wrenches, screwdrivers, welding equipment, etc. need to be prepared. At the same time, it is also necessary to prepare safety protection equipment, such as hard hats, safety shoes, gloves, goggles, etc.

Pretreatment of steel pipe

Before installing large-mouth straight-seam steel pipes, the steel pipes need to be pretreated. First of all, the surface of the steel pipe should be cleaned to remove oil and impurities on the surface. Secondly, it is necessary to carry out anti-corrosion treatment on the steel pipe to ensure that it will not be corroded and damaged during use. Finally, the steel pipe is cut and processed for easy installation and connection.

Installation and connection of steel pipes

When installing and connecting large-mouth straight-seam steel pipes, the following points need to be paid attention to:

1. The connection method of the steel pipe should meet the design requirements, and the connection should be firm and reliable.

2. The joints of steel pipes should be sealed to prevent water and air leakage.

3. The joints of steel pipes should be treated with anti-corrosion to ensure that they will not be corroded and damaged during use.

4. The installation of the steel pipe should be carried out in accordance with the design requirements to avoid deviation and deformation.

5. Pay attention to safety during the installation of steel pipes to avoid accidents.

Conduct steel pipe testing and acceptance

After the large-mouth straight-seam steel pipe is installed, it needs to be tested and accepted. First, a hydrostatic test is carried out to check the tightness and pressure bearing capacity of the steel pipe. Secondly, visual inspection and dimensional inspection should be carried out to ensure that the quality of the steel pipe meets the requirements. Finally, an anti-corrosion inspection should be carried out to ensure that the anti-corrosion measures of the steel pipe are effective.

In short, when installing large-mouth straight-seam steel pipes, you need to pay attention to the above points to ensure the quality and safety of the steel pipes. At the same time, it is also necessary to abide by relevant safety regulations and operating procedures to ensure safe production.

How to control the quality of large-diameter steel pipes?

The main production process of large diameter straight seam welded pipe

How much pressure can large-diameter thick-walled straight seam steel pipes?

Large-diameter seamless pipe thermal molding manufacturing process