Steel pipe pile is a common component in the construction of bridge pile foundations. It has the advantages of high bearing capacity, flexible pile driving, and fast construction speed. For complex terrain, steel pipe pile is more suitable for this environment.

The construction process of steel pipe pile

1. Construction preparation: equipment selection, material inspection, mix ratio confirmation, site treatment, etc.;

2. Rig positioning: measure in sections according to the drawing and set the center point of the hole position according to the spacing of piles as required by the design. Firstly, ensure that the hole position is correct, and ensure that the rig is in position and aligned smoothly after the equipment enters the site for construction disclosure;

3. Hole formation: that is, drilling by the drilling machine. During the drilling process, it is necessary to check the stratum at any time to select the drilling frequency.

4. Steel tube support and lifting: the steel tube is welded by professional technicians and transported to the site, and the steel tube is aligned with the hole slowly below manually.

5, cement slurry configuration and grouting: according to the mixing ratio to make cement slurry, use of grouting pipe to ensure the grouting to the bottom of the hole, after the end of the single hole must use high-pressure water to flush the grouting pipe to prevent blockage.

Cangzhou Shenlong Pipe Manufacturing Co., Ltd. specializes in the production of steel pipe piles. We can design and produce various specifications, lengths, and required steel pipe piles according to the project requirements. The products have been used in the United Arab Emirates, the Netherlands, Vietnam, Canada, and other countries.