Hot-dip galvanizing, at high temperatures the zinc ingots melt, are placed in the auxiliary material, then the metal structure is immersed in a zinc plating bath so that the metal member is attached to a layer on the zinc layer.

The hot galvanized advantage depends on its preservative ability, the better the adhesion and hardness of the galvanized layer.

Cold galvanizing is a zinc salt solution by electrolysis, to the plating on the coating, in general, which do not have heating, the amount of zinc rarely encountered humid environment is very easy to fall off. The cold galvanizing physical treatment, just in the surface brush a layer of zinc, zinc coating so easy to fall off the use of hot-dip galvanized construction.

Process of hot-dip galvanizing and cold galvanizing

Hot dip galvanized is immersed in liquid zinc dissolved workpiece degreasing, pickling, dipping, drying a certain period of time and put forward.

Cold galvanizing, also called electro-galvanized, is the use of an electrolysis device to the workpiece into the composition of the zinc salt solution, after degreasing, pickling, and connecting the negative electrode of the electrolytic device; the zinc plate placed at the opposite side of the workpiece is connected in the electrolytic device the positive electrode, the power is turned on, a current from the positive electrode to the negative directional movement, it will be deposited on the workpiece with a layer of zinc.

The appearance of hot-dip galvanizing and cold galvanizing

Cold galvanizing looks more smooth, and bright, color passivation process plating layer is yellow-green in color, was colorful. The plating layer was bluish-white or white with a white passivation process green, a white coating passivation process and the sun was a significant Colorful angle. The complex workpiece's angular edges parts prone to "electrical burning" from the gloom, the parts of the zinc layer thick. The Yin corner site is easy to form a current dead undercurrent gray area and the area zinc layer is thinner. The workpiece overall zinc tumor, caking phenomenon.

Hot dip galvanized looks a little rough compared to the electro-galvanized, silvery-white, look-prone process waterlines and a few drops of tumor are more obvious, especially at the one end of the workpiece. Hot dip galvanized zinc layer than a few times the electro-galvanized thick corrosion protection is several times that of the electro-galvanized.

Cangzhou Shenlong Pipe Manufacturing Co., Ltd. cooperates with Baosteel and Baogang to produce large-caliber seamless steel pipe, straight-seam welded pipe, spiral steel pipe, and pipe fittings. The products comply with API, ASTM, DIN, BS, and JIS standards, and can accept SGS, BV, and other inspections. The products are used in oil, natural gas, bridge, water conservancy, and other large-scale projects, which are worthy of trust.