Reducing Tee: Branch pipes differing in diameter from the other two are called reducing tees. Those with the same diameter at both ends are called equal diameter tees.

Reduced-path tee is widely used in the construction and maintenance of petrochemical, petroleum and natural gas, liquefied gas, chemical fertilizer, power plant, nuclear power, shipbuilding, papermaking, pharmaceutical, food hygiene, urban construction and other industries.

How is the reducer tee made?

1. The use of die and equipment should be paid attention to in reducing tee production

Reducing tee before production, is used in the mold, operation is to will bloom in the lower die first, then on the mold, to make the pipe ends on both ends of the shaft head pressure, which in turn by the shaft head center Kong Tong into high pressure liquid, the high pressure liquid and under the joint action of axial compression force bulging and obtain the needed parts, however, the existing reducing tee manufacturing equipment, When change mould is very troublesome, need to uninstall first before install the good module, and then the need to replace the module installed, then adjust to make the mould and lower mould positioning calibration positioning, bolted on mould and lower mould again, lead to remove and replace the module is not very convenient, which increased the amount of labor workers, and reduce the working efficiency, so, With the development of science and technology, there are now special equipment in the society.

The processing equipment consists of metal bar, transformer, commutator, bracket parts, such as operation, at the top of the pipe on the device, the metal bar is heated, jack and metal bar ejection, outward wall materials natural out a reducing tee in the composition of the blank, then surely the length of the corresponding standard section welding on the ejection of reducing tee blank, To produce final products, this special processing equipment has simple structure and low cost. It does not need other injection molding machines and injection molds to manufacture reductive three-way pipe fittings, which can reduce the production cost of this kind of pipe fittings and improve the production power.

2. Reducing tee production need to pay attention to the process parameters

The current, voltage, speed and so on in the welding process will directly affect the welding quality. In the process of extrusion forming, the pressure is too high or too low will cause bad forming, resulting in repair or scrap, so, the push speed of hot push tee should be heated to the specified temperature of the heating speed, otherwise it will cause bad forming of the tee; In the reduction tee forming, after several deformation will reach the required shape and size, and the influencing factor is the die core, so, the control of the shape and size of the die core is very important to the tee.

Well, the above is the solution of Cangzhou Shenlong Pipeline Manufacturing Co., Ltd. on "how to produce the reducer tee". I hope you can understand it, and then pay attention to the correct use of the reducer tee, so that it can be used for a long time.

Cangzhou Shenlong Pipe specializes in the production of steel pipe and pipe fittings, including elbow, tee, reducer, etc., the product quality is guaranteed, can arrange SGS inspection, is the first choice for some large projects.