Product List
A Stainless seamless pipe, as the name suggests, is a pipe without a seam or a weld-joint. Seamless pipes are thought to be able to withstand higher pressure, higher temperatures, higher mechanical stress and a corrosive atmosphere. It can be found in a wide range of applications such as in oil and gas, refinery, petrochemical, chemical, fertilizer, power, automotive, bearing, mechanical and structural.
Stainless seamless pipe type
TP304 stainless tube, TP316L stainless tube, TP321 stainless tube and so on
Stainless seamless pipe specification:
Outer diameter: 1/2”-30” (21mm-762mm)
Wall thickness: 1.5mm-30mm
Length: 3m-14m
Stainless seamless pipe application
Widely used in industry, chemical industry, construction, water treatment, agricultural irrigation, highway billboards, fire fighting , bridge supporting , gas & oil conveying, mine and oilfield drilling.
Seamless stainless steel pipe specification and size
Seamless stainless steel pipe is a hollow steel bar, a large number of pipes used for conveying fluids, such as oil, gas, water, gas, steam,heat exchanger,mechinical machine.
Product Name | Executive | Dimension | Steel Code / Steel Grade |
Seamless Austenitic Stainless Steel Pipes | ASTM A312, A312M ASME SA312 / SA312M | OD: 1/4"-20" WT: SCH5S-SCH80S | TP304, TP304L, TP304H, TP310, TP310S, TP316, TP316L, TP316Ti, TP317, TP317L, TP321, TP321H, TP347, TP347H |
Seamless Austenitic Stainless Steel Tubing for General Service | ASTM A269 ASME SA269 | OD: 6.0-50.8mm WT: 0.8-10.0mm | TP304, TP304L, TP304H, TP310, TP310S, TP316, TP316L, TP316Ti, TP317, TP317L, TP321, TP321H, TP347, TP347H |
Seamless Austenitic Alloy-Steel Boiler, Super Heater and Heat-Exchanger Tubes | ASTM A213 / A213M ASME SA213 / SA213M | OD: 6.0-50.8mm WT: 0.8-10.0mm | TP304, TP304L, TP304H, TP310, TP310S, TP316, TP316L, TP316Ti, TP317, TP317L, TP321, TP321H, TP347, TP347H |
Seamless Duplex Stainless Steel Tubing for General Service | ASTM A789 / A789M | OD: 19.0-60.5mm WT: 1.2-5.0mm | S31803, S32205, S32750 |
Seamless Duplex Stainless Steel Pipes | ASTM A790 / A790M | OD: 3/4"-10" WT: SCH5S-SCH80S | S31803, S32205, S32750 |
Seamless Stainless Steel Mechanical Tubing | ASTM A511 | OD: 6.0-50.8mm WT: 0.8-10.0mm | MT304, MT304L, MT304H, MT310, MT310S, MT316, MT316L, MT317, MT317L, MT321, MT321H, MT347 |
Seamless Stainless Steel Tubes for Pressure Purposes | EN 10216 DIN 17456, 17458 | OD: 6.0-530.0mm WT: 0.8-34.0mm | 1.4301, 1.4307, 1.4541, 1.4401, 1.4404, 1.4571, 1.4878, 1.4432, 1.4462 |
Steel Grade | C% Max. | Si% Max. | Mn% Max. | P% Max. | S% Max. | Cr% Max. | Ni% Max. | Mo% Max. | Ti% Max. | Other |
SUS 304 | 0.08 | 1.0 | 2.0 | 0.045 | 0.03 | 18.0-20.0 | 8.0-10.5 | - | - | - |
SUS 304L | 0.03 | 1.0 | 2.0 | 0.045 | 0.03 | 18.0-20.0 | 9.0-13.0 | - | - | Cu:1.0-3.0 |
SUS 310S | 0.08 | 1.5 | 2.0 | 0.045 | 0.03 | 24.0-26.0 | 19.0-22.0 | - | - | - |
SUS 316L | 0.03 | 1.0 | 2.0 | 0.045 | 0.03 | 16.0-18.0 | 12.0-15.0 | 2.0-3.0 | - | - |
SUS 321 | 0.08 | 1.0 | 2.0 | 0.045 | 0.03 | 17.0-19.0 | 9.0-13.0 | - | 5XC MIN | - |
Steel Grade | N/mm 2 MIN. Tensile Stress | N/mm 2 MIN. Proof Stress | Elongation MIN. | HRB MAX. Hardness | Bendability:Bending Angle | Bendability:Inside Radius |
SUS 304 | 520 | 205 | 40 | 90 | No Require | - |
SUS 304L | 480 | 175 | 40 | 90 | No Require | - |
SUS 310S | 520 | 205 | 40 | 90 | No Require | - |
SUS 316L | 480 | 175 | 40 | 90 | No Require | - |
SUS 321 | 520 | 205 | 40 | 90 | No Require | - |